How to Make a Centrepiece Fruit Bowl from Scavenged Sticks

Give your free time creative purpose

The centrepiece fruit bowl every table was made for… provided free by Mother Nature!

That’s right, it’s never been easier to make something so eye-catching, from a material so readily avaialble.

Just collect some sticks when you next go for a walk in the countryside… and follow the foolproof technique below.

Stylish twig and wire bowl
Looks good with fruit.
Stylish twig and wire bowl
Looks good without fruit.

What will I learn?

1) Not all craft materials have to be man made, wood in particular can be used in it’s most natural form.

2) How a simple technique repeated multiple times can create a dramatic effect.

3) Metal biscuit tins are a useful, and increasingly rare, source of tin that can be easily cut using tin snips.

Step by step guide

If you’d like a FREE printable worsheet sign-up using the box below and you’ll receive a download link via email.

Subscribe Now

LEARN how to transform the stuff around you into fun and useful things:

Printable artwork

Time to get going… literally!

Take a stroll
How to make a Twig and Wire Fruit Bowl: illustration 1

Because the first thing you need to do is go take a walk in the woods and forage for the small branches (1) that have fallen from trees.

Be choosy
How to make a Twig and Wire Fruit Bowl: illustration 2

You need branches that have a straight section, but they don’t have to be perfect, and are around 8mm thick… about the same thickness as the handle of a large wooden spoon (2).

Collect at least 40 sticks, but more would be better, as you might have to discard some later.

Cut & drill
How to make a Twig and Wire Fruit Bowl: illustration 3

Now, cut a 170mm section long from the straightest part of the branch (3A). Roll the stick so the LEAST straight angle is facing upwards (3B) and then drill a 2mm hole, 8mm (3C) and 38mm (3D) from each end of the stick.

Join with wire
How to make a Twig and Wire Fruit Bowl: illustration 4

The next step is to join the sticks with wire, one by one, as you can see above (4). The following steps will show you how to bend the wire.

How to make a Twig and Wire Fruit Bowl: illustration 5

First, feed 1.5mm thick wire (at least 900mm long) through the hole that’s 38mm from the end of the stick (5A). Wrap the wire all the way around, almost back to the exit hole, before curving it outward slightly (5B).

How to make a Twig and Wire Fruit Bowl: illustration 6

Slide the next stick on (6A) and butt it against a precut 13mm spacer (6B). Wrap the wire aound the stick (6C) just like the previous step (6D).

Repeated this step until all 40 sticks have been joined together.

Twist & tie
How to make a Twig and Wire Fruit Bowl: illustration 7

Join the two ends of the wire by twisting them together using pliers (8A). Trim excess wire with cutters, and then bend the join over (8B).

How to make a Twig and Wire Fruit Bowl: illustration 8

Feed a length of wire through the other hole in the sticks. Squeeze the sticks together so the ends touch (9A). Twist, trim and join the wire ends (9B).

Make the base
How to make a Twig and Wire Fruit Bowl: illustration 9

Take an old biscuit tin (or something similar) and cut out a large flat section using tin snips (10A). Place the bowl base down on this section and trace around the inside using a marker pen (10B).

Draw 8 tabs (15mm x 15mm ) around the circle, equally spaced, using the marker pen (11). You don’t need to be too accurate!

How to make a Twig and Wire Fruit Bowl: illustration 10

Now, cut around the line using tin snips (12). Bend back the tabs, and then bend them forward, putting a fold about 1/3 of the way up the tab. Don’t fuss too much, as you’ll adjust the tabs in the next step.

How to make a Twig and Wire Fruit Bowl: illustration 11

Push the base into the bowl, with the tabs facing downwards (13). Turn the bowl over, and adjust the tabs so each one rests on the end of a stick (14).

Get drawing
How to make a Twig and Wire Fruit Bowl: illustration 12

Drill a small pilot hole into each tab (14) and then hammer in a small panel pin (15). That’s your centrepiece bowl finished, fill it with fruit and proudly put it in the centre of your table!

Materials

  • Branches/sticks/twigs
  • 1.5mm wire
  • Biscuit tin (or somehting similar)
  • Wire cutters or pliers with a cutter
  • Drill and small drillbit (1.5mm)
  • Hammer and panel pins

Give it your own unique twist

When it comes to planning your next craft project, try looking around you, there could be things right under your nose you could make use of.

If so, try making something fun from them, it will exercise your imagination and save you a trip to the shops!

Written by
Photo of Scott Bedford
Scott Bedford

Maker, Illustrator and Author